Taifu Xima Motor SBB2 Series High Voltage Reactive Power Compensation Cabinet Product Overview
      Taifu Xima Motor SBB series high voltage reactive power compensation cabinet is mainly used in 6kV~10kV power system as a reactive power compensation device for improving power factor, adjusting voltage and reducing network loss.
      The load in the power system is mostly inductive, and the increasing use of power electronics by various industrial and mining enterprises makes the grid power factor very low. The lower power factor reduces equipment utilization, increases power supply investment, degrades voltage quality, reduces equipment life, and increases line loss.
      In order to improve these factors that are not conducive to production due to the low power factor of the grid, the grid power factor must be effectively improved. Obviously, it is unreasonable that these reactive powers are supplied by the generator and transmitted over long distances, and it is usually impossible. A reasonable approach is to generate reactive power where reactive power is required. In an actual power system, most of the load is an asynchronous motor. The equivalent circuit can be regarded as a series circuit of resistance and inductance, and the phase difference between voltage and current is large, and the power factor is low. After the parallel capacitors, the phase difference between voltage and current becomes smaller, which increases the power factor.

Taifu Xima motor SBB2 series high voltage reactive power compensation cabinet performance characteristics:
      1. Select famous equipment, adopt advanced design, and have long service life.
      2, reasonable layout, humanized design, easy to operate, use and maintain.
      3, comes with a discharge device to ensure personal and equipment safety.
      4, with open triangle and overcurrent, overload protection and other protection functions, making the operation safe and reliable.
      5, using vacuum plating film metallized polypropylene film parallel capacitor, its own loss is small, because polypropylene film has high working field strength and low dielectric loss and small size, large capacity, low loss, light weight and so on.
      6. The deviation between the measured capacitance of the capacitor and its rated value does not exceed +10%-5% of the rated value.
      7. A series reactor can be installed to limit the inrush current during the capacitor combination gate, limit the operation overvoltage and suppress the influence of higher harmonics on the capacitor in the grid.
      8. The power saving effect is obvious. The power factor of the power grid is increased to 0.95 or more, and the current is reduced by 10% to 20%, which effectively reduces the line loss.
      9. The self-loss is low. The capacitor used in this device has very little energy loss, which is less than one-fifth of that of a general oil-immersed low-capacitor capacitor.
      10. Fully consider the actual situation of the user, the capacitor group and related control components of the local compensation cabinet are placed in the same cabinet, which is convenient for installation and use of the high-voltage motor single-machine compensation.